quality-manager-qms-iso13485

Quality Manager - QMS ISO 13485 Specialist

ISO 13485:2016 Quality Management System implementation, maintenance, and certification support for medical device organizations.

---

Table of Contents

• QMS Implementation Workflow
• Document Control Workflow
• Internal Audit Workflow
• Process Validation Workflow
• Supplier Qualification Workflow
• QMS Process Reference
• Decision Frameworks
• Tools and References

---

QMS Implementation Workflow

Implement ISO 13485:2016 compliant quality management system from gap analysis through certification.

Workflow: Initial QMS Implementation

1. Conduct gap analysis against ISO 13485:2016 requirements
2. Document current state vs. required state for each clause
3. Prioritize gaps by:
   • Regulatory criticality
   • Risk to product safety
   • Resource requirements
4. Develop implementation roadmap with milestones
5. Establish Quality Manual per Clause 4.2.2:
   • QMS scope with justified exclusions
   • Process interactions
   • Procedure references
6. Create required documented procedures — see Mandatory Documented Procedures for the full list
7. Deploy processes with training
8. Validation: Gap analysis complete; Quality Manual approved; all required procedures documented and trained

Use the Gap Analysis Matrix template in qms-process-templates.md to document clause-by-clause current state, gaps, priority, and actions.

QMS Structure

Level	Document Type	Example
1	Quality Manual	QM-001
2	Procedures	SOP-02-001
3	Work Instructions	WI-06-012
4	Records	Training records

---

Document Control Workflow

Establish and maintain document control per ISO 13485 Clause 4.2.3.

Workflow: Document Creation and Approval

1. Identify need for new document or revision
2. Assign document number per numbering convention:
   • Format: [TYPE]-[AREA]-[SEQUENCE]-[REV]
   • Example: SOP-02-001-01
3. Draft document using approved template
4. Route for review to subject matter experts
5. Collect and address review comments
6. Obtain required approvals based on document type
7. Update Document Master List
8. Validation: Document numbered correctly; all reviewers signed; Master List updated

Document Numbering Convention

Prefix	Document Type	Approval Authority
QM	Quality Manual	Management Rep + CEO
POL	Policy	Department Head + QA
SOP	Procedure	Process Owner + QA
WI	Work Instruction	Supervisor + QA
TF	Template/Form	Process Owner
SPEC	Specification	Engineering + QA

Area Codes

Code	Area	Examples
01	Quality Management	Quality Manual, policy
02	Document Control	This procedure
03	Training	Competency procedures
04	Design	Design control
05	Purchasing	Supplier management
06	Production	Manufacturing
07	Quality Control	Inspection, testing
08	CAPA	Corrective actions

Document Change Control

Change Type	Approval Level	Examples
Administrative	Document Control	Typos, formatting
Minor	Process Owner + QA	Clarifications
Major	Full review cycle	Process changes
Emergency	Expedited + retrospective	Safety issues

Document Review Schedule

Document Type	Review Period	Trigger for Unscheduled Review
Quality Manual	Annual	Organizational change
Procedures	Annual	Audit finding, regulation change
Work Instructions	2 years	Process change
Forms	2 years	User feedback

---

Internal Audit Workflow

Plan and execute internal audits per ISO 13485 Clause 8.2.4.

Workflow: Annual Audit Program

1. Identify processes and areas requiring audit coverage
2. Assess risk factors for audit frequency:
   • Previous audit findings
   • Regulatory changes
   • Process changes
   • Complaint trends
3. Assign qualified auditors (independent of area audited)
4. Develop annual audit schedule
5. Obtain management approval
6. Communicate schedule to process owners
7. Track completion and reschedule as needed
8. Validation: All processes covered; auditors qualified and independent; schedule approved

Use the Audit Program Template in qms-process-templates.md to schedule audits by clause and quarter across processes such as Document Control (4.2.3/4.2.4), Management Review (5.6), Design Control (7.3), Production (7.5), and CAPA (8.5.2/8.5.3).

Workflow: Individual Audit Execution

1. Prepare audit plan with scope, criteria, and schedule
2. Notify auditee minimum 1 week prior
3. Review procedures and previous audit results
4. Prepare audit checklist
5. Conduct opening meeting
6. Collect evidence through:
   • Document review
   • Record sampling
   • Process observation
   • Personnel interviews
7. Classify findings:
   • Major NC: Absence or breakdown of system
   • Minor NC: Single lapse or deviation
   • Observation: Risk of future NC
8. Conduct closing meeting
9. Issue audit report within 5 business days
10. Validation: All checklist items addressed; findings supported by evidence; report distributed

Auditor Qualification Requirements

Criterion	Requirement
Training	ISO 13485 awareness + auditor training
Experience	Minimum 1 audit as observer
Independence	Not auditing own work area
Competence	Understanding of audited process

Finding Classification Guide

Classification	Criteria	Response Time
Major NC	System absence, total breakdown, regulatory violation	30 days for CAPA
Minor NC	Single instance, partial compliance	60 days for CAPA
Observation	Potential risk, improvement opportunity	Track in next audit

---

Process Validation Workflow

Validate special processes per ISO 13485 Clause 7.5.6.

Workflow: Process Validation Protocol

1. Identify processes requiring validation:
   • Output cannot be verified by inspection
   • Deficiencies appear only in use
   • Sterilization, welding, sealing, software
2. Form validation team with subject matter experts
3. Write validation protocol including:
   • Process description and parameters
   • Equipment and materials
   • Acceptance criteria
   • Statistical approach
4. Execute IQ: verify equipment installed correctly and document specifications
5. Execute OQ: test parameter ranges and verify process control
6. Execute PQ: run production conditions and verify output meets requirements
7. Write validation report with conclusions
8. Validation: IQ/OQ/PQ complete; acceptance criteria met; validation report approved

Validation Documentation Requirements

Phase	Content	Evidence
Protocol	Objectives, methods, criteria	Approved protocol
IQ	Equipment verification	Installation records
OQ	Parameter verification	Test results
PQ	Performance verification	Production data
Report	Summary, conclusions	Approval signatures

Revalidation Triggers

Trigger	Action Required
Equipment change	Assess impact, revalidate affected phases
Parameter change	OQ and PQ minimum
Material change	Assess impact, PQ minimum
Process failure	Full revalidation
Periodic	Per validation schedule (typically 3 years)

Special Process Examples

Process	Validation Standard	Critical Parameters
EO Sterilization	ISO 11135	Temperature, humidity, EO concentration, time
Steam Sterilization	ISO 17665	Temperature, pressure, time
Radiation Sterilization	ISO 11137	Dose, dose uniformity
Sealing	Internal	Temperature, pressure, dwell time
Welding	ISO 11607	Heat, pressure, speed

---

Supplier Qualification Workflow

Evaluate and approve suppliers per ISO 13485 Clause 7.4.

Workflow: New Supplier Qualification

1. Identify supplier category:
   • Category A: Critical (affects safety/performance)
   • Category B: Major (affects quality)
   • Category C: Minor (indirect impact)
2. Request supplier information:
   • Quality certifications
   • Product specifications
   • Quality history
3. Evaluate supplier based on:
   • Quality system (ISO certification)
   • Technical capability
   • Quality history
   • Financial stability
4. For Category A suppliers:
   • Conduct on-site audit
   • Require quality agreement
5. Calculate qualification score
6. Make approval decision:

   • 80: Approved

   • 60-80: Conditional approval
   • <60: Not approved
7. Add to Approved Supplier List
8. Validation: Evaluation criteria scored; qualification records complete; supplier categorized

Supplier Evaluation Criteria

Criterion	Weight	Scoring
Quality System	30%	ISO 13485=30, ISO 9001=20, Documented=10, None=0
Quality History	25%	Reject rate: <1%=25, 1-3%=15, >3%=0
Delivery	20%	On-time: >95%=20, 90-95%=10, <90%=0
Technical Capability	15%	Exceeds=15, Meets=10, Marginal=5
Financial Stability	10%	Strong=10, Adequate=5, Questionable=0

Supplier Category Requirements

Category	Qualification	Monitoring	Agreement
A - Critical	On-site audit	Annual review	Quality agreement
B - Major	Questionnaire	Semi-annual review	Q

---

Content truncated.